Loopshore devices
Loop One
Loop One is a dependable device for versatile indoor air monitoring. It measures a wide range of indoor air variables and gives a comprehensive picture of indoor air quality. For particulate matter, Loop One measures not only the mass concentration but also the particle count per cubic metre in four size classes, so it can be used, for example, to follow the dust on a construction site all the way to the space being taken into use. Loop One works wirelessly on the mobile network, so it is reliable even in challenging geographical locations and in special spaces such as basements or remote storage facilities. The device is designed, styled and manufactured in Finland.
Variables Loop One monitors:
Temperature, humidity (relative and absolute humidity and dew point), carbon dioxide (CO2), TVOC (volatile organic compounds), particulate matter (PM1 / PM2.5 / PM4 / PM10 and particle counts), noise (dB), light, air pressure, device movement
• understated Finnish design with a wood composite casing
• alerts by email or text message
• clear air quality service 24/7
• extensive history data is kept in the service and can be saved
• 12-month warranty
• one device monitors nine (9) variables
• particulate matter as both mass concentration and particle count
• wireless, works on the 4G network (SIM card included)
• fast delivery, ready to use right away
• easy to use
• charging every 6–18 months
Specifications:
Connectivity:
4G / LTE-M & NB-IoT
Operating range:
0…+40 °C and 0–85 %RH
Dimensions:
132mm x 96mm x 35mm
Weight:
300g
Interval:
10 min (adjustable)
Battery:
2 × Li-Ion, 3.63V / 9800mAh / 35.56Wh
Battery life:
Charging every 6–18 months, USB / USB-C
IP rating:
IP20 (protect from rain outdoors)
Accuracy:
Temperature±0.1 °Ctypical in room conditions±0.3 °Cmax. over the whole operating rangeHumidity±1 %RHtypical in room conditionsCarbon dioxide±(30 ppm + 3 %)of reading in room conditionsAir pressure±1 hPaover the whole operating rangePM1 and PM2.5±(5 µg/m³ + 5 %)at concentrations below 100 µg/m³PM4 and PM10±25 µg/m³at concentrations below 100 µg/m³Noise±3 dBbetween 35 and 100 dBLight±20 %from light reflected off a pale wall
Typical uses:
• investigating and documenting indoor air problems
• following the air quality of offices and homes
• verifying suspected moisture damage
Loop Delta
Meet our newest device, Loop Delta!
Loop Delta is an accurate and reliable solution for measuring pressure differences. Delta continuously tracks changes in pressure difference and filters out momentary disturbances such as gusts of wind or doors opening. The device works wirelessly on the mobile network, which ensures a connection even at challenging sites, for example in basements, sheet-metal structures and sparsely populated areas where devices on unlicensed frequencies may not work reliably. The measurement interval can be adjusted as needed, so Loop Delta suits both real-time adjustment of ventilation and long-term monitoring over years.
Variables Loop Delta monitors:
Pressure difference, temperature, humidity (relative and absolute humidity and dew point), device movement
• understated Finnish design with a wood composite casing
• alerts by email or text message
• clear air quality service 24/7
• extensive history data is kept in the service and can be saved
• 12-month warranty
• one device monitors four (4) variables
• wireless, works on the 4G network (SIM card included)
• fast delivery, ready to use right away
• easy to use
• charging every 12–24 months
Specifications:
Connectivity:
4G / LTE-M & NB-IoT
Operating range:
-20…+40 °C and 0–100 %RH
Dimensions:
132mm x 96mm x 35mm
Weight:
300g
Interval:
10 min (adjustable)
Battery:
2 × Li-Ion, 3.63V / 9800mAh / 35.56Wh
Battery life:
Charging every 12–24 months, USB-C
IP rating:
IP20 (protect from rain outdoors)
Installation:
Accuracy:
Differential pressure±3 %of reading±0.08 Paat zero pointTemperature±0.1 °Ctypical in room conditions±0.3 °Cmax. over the whole operating rangeHumidity±1 %RHtypical in room conditions
Typical uses:
• following and adjusting how the ventilation works
• verifying under- and overpressure across the building envelope and between spaces
• long-term structural monitoring
Loop Zero
With Loop Zero, temperature and humidity conditions are verified accurately and continuously. Device movement, such as vibrations, is also shown in the Loop Zero measurement results. Both real-time information and history data are available throughout the measurement period. The most affordable option for sites that require reliable temperature and humidity measurement. Loop Zero is designed, styled and manufactured in Finland.
Variables Loop Zero monitors:
Temperature, humidity (relative and absolute humidity and dew point), device movement
• understated Finnish design with a wood composite casing
• alerts by email or text message
• clear air quality service 24/7
• extensive history data is kept in the service and can be saved
• 12-month warranty
• one device monitors four (4) variables
• wireless, works on the 4G network (SIM card included)
• fast delivery, ready to use right away
• easy to use
• up to 36 months between charges
Specifications:
Connectivity:
4G / LTE-M & NB-IoT
Operating range:
-20…+40 °C and 0–100 %RH
Dimensions:
132mm x 96mm x 35mm
Weight:
300g
Interval:
When conditions change or at a set interval
Battery:
2 × Li-Ion, 3.63V / 9800mAh / 35.56Wh
Battery life:
Up to 36 months between charges, USB-C
IP rating:
IP20 (protect from rain outdoors)
Accuracy:
Temperature±0.1 °Ctypical in room conditions±0.3 °Cmax. over the whole operating rangeHumidity±1 %RHtypical in room conditions
Typical uses:
• following how the heating works
• monitoring the conditions of storage spaces
• long-term monitoring of moisture conditions
Loop Extemp
Loop Extemp is a Finnish temperature monitoring device that measures temperature around the clock with a probe on a cable. The device detects deviations automatically and sends alerts based on limits set by the user. Thanks to wireless data transfer and battery power, Extemp is easy to move from one space to another as needed. Loop Extemp is designed, styled and manufactured in Finland.
Variables Loop Extemp monitors:
The device measures temperature (a wired temperature probe and the device’s own internal temperature), humidity (relative and absolute humidity and dew point) and device movement.
The wired temperature measurement can use either a digital temperature sensor or a resistance temperature detector (PT100 or PT1000). The device can also be connected to existing systems that use PT100 or PT1000 resistance sensors.
• one device monitors four (4) variables
• wireless, works on the 4G network (SIM card included)
• made to order in 1–2 weeks, delivery time confirmed when ordering
• easy to use
• up to 24 months between charges
• understated Finnish design with a wood composite casing
• alerts by email or text message
• clear air quality service 24/7
• extensive history data is kept in the service and can be saved
• 12-month warranty
Specifications:
Connectivity:
4G / LTE-M & NB-IoT
Operating range:
-20…+40 °C and 0–100 %RH
Dimensions:
132mm x 96mm x 35mm
Weight:
300g
Probe:
-200…+400 °C (depends on the sensor)
Interval:
When conditions change or at a set interval
Battery:
2 × Li-Ion, 3.63V / 9800mAh / 35.56Wh
Battery life:
Up to 24 months between charges, USB-C
IP rating:
IP20 (protect from rain outdoors)
Accuracy:
Probe±0.25 °Cdigitalby the sensorPT100 and PT1000Internal temperature±0.1 °Ctypical in room conditions±0.3 °Cmax. over the whole operating rangeHumidity±1 %RHtypical in room conditions
Typical uses:
• following the temperatures of pipework and processes
• monitoring refrigeration equipment
• renewing existing measurement systems
Norolan studied its production facilities
and learned from real-time data
“I didn’t know there was such a handy way to view real-time data. We made observations in our production facilities: even something as simple as a change in cleaning method affected what stays floating in the air.”
JYRKI KASANEN
CEO / Norolan Oy
